Winged Standard Used Wooden Pallet 1200 × 1000mm

Winged Standard Used Wooden Pallet 1200 × 1000mm

The Winged Standard Used Wooden Pallet 1200 × 1000mm has extended top deck boards that overhang past the pallet blocks, creating a wider load surface than a standard flush-edge pallet. Those extended boards — the wings — give extra support for goods that sit wider than the pallet base, for bagged or sacked products that compress over the edge, and for awkward load shapes that do not naturally fit a standard rectangular pallet.

This is a specialist pallet, not an everyday block pallet. Buyers reach for winged stock when load shape is the constraint rather than weight or cost.

Specifications & Construction

• Dimensions: 1200 × 1000mm base footprint
• Top deck: Extended deck boards (wings) past the pallet edge for wider load support
• Construction: Block pattern with wing-extended top deck
• Entry: Forklift entry typically from the long side; confirm batch construction for your specific handling setup
• Material: Used softwood/hardwood mix
• Grade: Standard used condition
• Typical weight: 24–30kg per pallet

The base footprint stays 1200 × 1000mm — the UK standard — so the pallet still fits standard UK racking and shipping setups. The extra deck width sits above the pallet edge, which means rack edge supports clear the wings without modification in most cases. Confirm beam spacing and load overhang dimensions with your rack supplier if you are storing winged pallets on racking with edge supports.

What Makes Winged Pallets Different

A standard block pallet has top deck boards that finish flush with the pallet edge. A winged pallet extends one or both pairs of deck boards past that edge, giving extra contact area for wider loads. The benefit is structural: bagged or compressible loads that would otherwise overhang an unsupported pallet edge get full deck contact, which improves load stability during handling and stacking.

Compared with a standard Grade B Standard Used Wooden Pallet 1200 × 1000, the winged version is built for load shape rather than load weight. If you need a stronger pallet for heavier loads, look at the Converted Standard 1200 × 1000 or the Heavy Duty Three-Legger 1200 × 1000.

Best For: Industries & Use Cases

• Bagged goods — animal feed, fertiliser, aggregates, pet food, building materials
• Sacked products where bags compress and spread over the pallet edge
• Wider cartons or bundled goods exceeding the pallet base footprint
• Sheet materials, panels and boards with slight overhang
• Bundled or strapped loads with awkward perimeter shapes
• Operations stacking pallets where edge support reduces compression damage on the load below
• Manufacturing and distribution handling non-uniform pallet loads

Winged stock is rarely a general-purpose pallet — it is a problem-solver for specific load shapes. If your products fit cleanly inside a standard pallet footprint, a regular block pallet is usually the better choice.

Condition Expectations

• Working used condition with visible service marks
• Wings intact and supporting the wider top deck across the pallet length
• All structural components — blocks, stringer or bearer, base deck — sound at supply
• Possible historic repairs, including replaced or repaired wing boards
• Inspected before supply for structural fitness

For a side-by-side on what used pallet grades typically mean, see pallet grades explained.

Bulk & Volume Pricing

Current single-unit list price: £3.50 per pallet.

Winged stock is sold in bulk, minimum 80 pallets. Because availability varies by batch (winged pallets cycle through trade at lower volumes than standard block pallets), larger orders may be scheduled across split deliveries rather than a single drop.

• 80 pallets — minimum order
• 200 pallets — quote on request, scheduled if needed by stock
• 500 pallets — quote on request, split delivery likely
• 1000+ pallets — quote on request, recurring supply arrangement

Delivery

Free delivery within 70km of Birmingham. Wider UK bulk delivery available. Collection available from 294 Cherrywood Rd, Birmingham, B9 4UU.

Payment Terms

Payment on delivery for standard orders. Bank transfer or card. Net 30 terms available for established accounts on orders of 500+ pallets.

Care & Maintenance

Inspect wings on receipt and before reuse — they are the load-bearing area for overhanging loads, and damaged wings reduce the value of the pallet for its intended use case. Store on level ground or in racking, dry, and stack empties no higher than six. Avoid forklift impact on the wings during handling — entering forks square to the long side reduces wing damage.

Frequently Asked Questions

What is a winged pallet?

A pallet where the top deck boards extend past the outer edge of the pallet base. The extensions — the wings — give extra contact area for wider or compressible loads that would otherwise overhang the pallet edge unsupported. Base footprint is still 1200 × 1000mm.

What is a winged pallet used for?

Bagged goods, sacked products, sheet materials and bundled or strapped loads where the load is wider than the pallet base or compresses over the edge during stacking. Common in animal feed, fertiliser, aggregates, building materials and panel distribution.

Will a winged pallet fit standard UK racking?

Usually yes — the base is the standard 1200 × 1000mm. The wings sit above the pallet edge so they typically clear standard rack edge supports. Confirm beam spacing and overhang against your specific rack design before bulk-ordering.

Can forklifts enter winged pallets from all sides?

Forklift entry on winged stock is typically from the long side. Confirm batch construction at quoting if four-way entry is essential to your operation.

How much weight can a winged pallet hold?

Treat working dynamic load as similar to a standard used block pallet — up to roughly 1000kg with even load distribution. For heavier loads, look at the Converted Standard or Heavy Duty Three-Legger.

How is a winged pallet different from a standard pallet?

Standard pallets have top decks flush with the pallet base. Winged pallets extend the top deck past the edge. The difference is load shape support — winged stock is selected when loads are wider than the base or compress over the edge.

Are winged pallets always available in stock?

Winged pallets cycle through the trade at lower volumes than standard block pallets. Stock levels vary. For large orders we typically schedule supply across several deliveries.

What is the minimum order?

80 pallets. We quote volume tiers at 200, 500 and 1000+, often with split deliveries to match available stock.

What if a winged pallet is not what I need?

See the wider standard used wooden pallets collection, or browse all used wooden pallets to find the right format.

Alternative Options

• Grade B Standard Used Wooden Pallet 1200 × 1000 — flush-edge working pallet
• Converted Standard Used Wooden Pallet 1200 × 1000 — reinforced for heavier loads
• Heavy Duty Three-Legger 1200 × 1000 — industrial-grade heavy loads
• All standard used wooden pallets

Why Buy from NA Pallets

Winged pallets are a niche supply line — they cycle through the UK pallet trade in smaller volumes than standard block pallets, so finding them in working bulk supply is harder than finding regular Grade B stock. NA Pallets carries winged pallets specifically for buyers handling bagged goods, sheet materials and wider load shapes, and we are happy to talk through whether winged is the right pick before you order. We supply from Birmingham across the West Midlands and nationwide.

Ready to Order?

To request a winged pallet quote, send:

• Quantity (minimum 80 pallets)
• Delivery postcode
• Required delivery date
• Load shape and approximate weight — we will confirm whether winged is the right pick

Contact us:

• Phone: 07435 126502
• Email: info@napallets.co.uk
• Address: 294 Cherrywood Rd, Birmingham, B9 4UU

Free delivery within 70km of Birmingham. Wider UK bulk delivery available. Minimum order 80 pallets.